+91 265 230 8600
Product
product features
CAll US
  • For Sales & Service :
  • +91 265 230 8600 / 6542623
Crush Tester (RCT / FCT / ECT / PAT)
Crush Tester
Crush - ECT FixtureFCT setRCT Set

Crush Resistance Tester

Suitable to Perform :

  1. Ring Crush Test (RCT) to evaluate the vertical rigidity of Paper
  2. Pin Adhesion Test (PAT) to evaluate the Flute-Liner bonding.
  3. Flat Crush Test (FCT) to  evaluate the rigidity of the Corrugated Board in the direction perpendicular to its face.
  4. Edge Crush Test (ECT) to evaluate the vertical load carrying capacity or rigidity in the direction of the flutes.

 

Interpretation :

  • Better RCT = Better ECT = Better BCT = Better Carton
  • Better FCT = Better Side Wall Resistance = Probable Better BCT = Better Carton
  • Better ECT = Better BCT = Better Carton
  • Better PAT = Better BCT = Better Carton

Tech Specs

Crush Resistance Tester.

Delux Model.

Electro-Mechanical model.

Digital Model with Backlit LCD Display for easy readability.

Pacmachine 94’ Award winner.

Suitable for :

  • Ring Crush Test (RCT), Confirms to TAPPI – T-822
  • Flat Crush Test (FCT), Confirms to TAPPI – T-825
  • Edge Crush Test (ECT), Confirms to TAPPI – T-811
  • Pin Adhesion Test (PAT). Confirms to TAPPI – T-821

All Test Jigs and Templates for RCT, FCT, ECT and PAT are chargeable EXTRA

 

Test Speed :

12.5 ± 0.25 mm/min in Compression and

100 ± 5 mm/min in Idle / Jog Speed.

With Stepper Motor & Drive for Precise Speed Control.

 

Platform Size : 150 x 150 mm

Travel length : > 75 mm.

With Ball Screw and Linear Guided Actuator Mechanism

  • high smoothness
  • low power needed
  • low noise
  • low friction
  • negligible wear-n-tear
  • negligible maintenance
  • great aesthetics.

 

Model # M100D-S

Single Column Design

Capacity: 100 Kgf       with Least Count / Resolution : 0.01 Kgf

With Auto-Calibration facility at 10 Kg.

 

Model # M200D-S               

Single Column Design

Capacity: 200 Kgf       with Least Count / Resolution : 0.02 Kgf

With Auto-Calibration facility at 20 Kg.

 

Model # M500D-S

Dual Column Design

Capacity: 500 Kgf       with Least Count / Resolution : 0.05 Kgf

With Auto-Calibration facility at 50 Kg.

 

Optional :

  • RCT Set

Consists of RCT Fixture, 3 Support Discs, RCT Spacer and SS Template

  • ECT Set

Consists of ECT Fixture, ECT Spacer and SS Template

  • FCT Set

Consists of FCT Fixture, FCT Spacer and SS Template

  • PAT Set

Consists of special Pin Fixture for your specific Flute Type (sample required), PAT Spacer and SS Template

PAT fixture is customized for each flute dimension. Multiple fixtures will be required for multiple flute types / sizes.

Note : Computerised Models (M 100/200/500 DS-DX) also available.

 

Utilities Required (To be supplied by the buyer) :

  • Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)
  • 10 Kg / 20 Kg / 50 Kg Cast Iron Weights (in any combination)

These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.

 

IQOQ / Validation Documentation Set also available.

© Copyright Test Techno Consultants 2016. All rights reserved