+91 265 230 8600
Product
product features
CAll US
  • For Sales & Service :
  • +91 265 230 8600 / 6542623
Texture Analyser
Food Texture Analyser
TA with Table & Compression FixtureTA Biscuit Snappro-texture-analyser-01pro-texture-analyser-02TA Bun SoftnessTA Mangopro-texture-analyser-03pro-texture-analyser-05pro-texture-analyser-06pro-texture-analyser-04TA BloomTA PunctureTA Pump ActuationTA Bite TestTA Packaging TestsTA Table

Texture Analyser / Food Texture Analyser

Suitable for Texture Test on a variety of products using Jigs & Fixtures (extra cost applies).

Texture Tests comprise of

  • Softness Test,
  • Hardness Test,
  • Bite Test,
  • Slice Test,
  • Poke Test,
  • Bloom Test,
  • Piercing Test,
  • Snap Test, etc etc etc.

It is used to measure or quantify feelings like Crispiness, Sponginess, etc.

Can be used to test Bakery, Confectionary, Dairy and a wide variety of Food Products, Cosmetics, and Pharmaceuticals.

Specs

Texture Analyser
Variable Speed Model with Stepper Drive
Fully Computerised Model.

Suitable for Texture Test on a variety of products using Jigs & Fixtures (extra cost applies).

Texture Tests comprise of

  • Softness Test,
  • Hardness Test,
  • Bite Test,
  • Slice Test,
  • Poke Test,
  • Bloom Test,
  • Piercing Test,
  • Snap Test, etc etc etc.

It is used to measure or quantify feelings like Crispiness, Sponginess, etc.

Machine Capacity : 10 Kgf (100N)
Load Cell resolution : 1 gm (0.01N)
Variable Test Speed : 1 – 500 mm/min
Max Travel Length : 300 mm

Features :

  • Stepper Drive for step-less speed variation over a large range.
    Microprocessor based controller with embedded Push Buttons on Control Panel.
  • Dual line, Backlit LCD display for stress free viewing.
    Peak hold facility to register maximum reading during test.
  • Auto-stop facility on machine overload (Overload Protection).
    Auto-Calibration facility using dead weights (to be arranged by Buyer).

Includes :

Data Acquisition System (Computer Uplink)

Features of DAS :

  • Full Controls and Calibration function via computer.
    With Computer Uplink Facility for Data Processing
  • Test Report Printing Facility (with Load vs. Time / Deflection Graph)
  • Calibration Report Printing Facility
    Facility to print on Pre-Printed or Blank Stationery.

( Includes Software and Linking Hardware. PC & Printer to be provided by you. )

Optional Modules:
Jigs & Fixtures
Special Jigs and Fixtures are required to perform tests on a Texture Analyser.

  • Flat Compression Platen (Set of 2)
    For a variety of tests.
  • Tensile Grips (Set of 2)
    For Peel / Seal / Tensile Tests on Plastic Films / Packaging.
  • 3-Point Snap (Set of Top Wedge + Bottom Support)
    For Chips, Wafers, Crackers, Biscuits, Chocolate, Breadsticks, etc.
  • Puncture / Poke Test (5 / 10 mm Dia)
    For a variety of tests on Food, Dairy, Confectionary, etc. products.
  • Bite Test (Set of top Tooth and bottom flat plate)
    For a variety of tests on Food, Dairy, Confectionary, etc. products.
  • Spherical Probe (10 / 20 / 25 / 30 mm dia)
    For a variety of tests on gels or pastes or high-viscosity products.
  • Conical Probe (20 / 25 / 30 mm dia)
    For a variety of tests on gels or pastes or high-viscosity products.
  • Wire Cutting Jig
    For Butter, Margarine, Cheese, etc.
    Based on you your requirements, we will quote for other Jigs & Fixtures also.

Utilities Required (To be supplied by the buyer) :

  1. Power Supply : 110/230 Volts AC at 60/50 Hz. (Fluctuation Free Power required)
  2. 3 Kg Bullion Weights.
    These weights are required for calibration at the time of installation and then every 6-months for routine calibrations.
  3. Desktop PC or Laptop PC
    Processor Type : Pentium 4 or better. (Preferably Core I3 or Higher)
    Memory : 2 GB RAM or better (Preferably 2 GB)
    Space : 500 mb free HDD space (minimum)
    Monitor : 17” Color Monitor with 1280 x 1024 resolution or better
    Operating System: Windows 7 Home Premium or higher (with latest updates & patches)
    Supporting Software : Adobe Acrobat Reader (Latest Version).
    Microsoft Dot Net Framework (Latest Version)
    Communication : 9-Pin (DB9) Serial Port (RS-232) REQUIRED
    Printer : Laser or Inkjet Printer. (No Dot-matrix support)

© Copyright Test Techno Consultants 2016. All rights reserved