Pouch Burst Tester / Pouch Compression Tester (Static + Dynamic Load Tester )

Pneumatic Model with constant rate of loading.

Suitable for testing the Seal Integrity of Liquid / Gas Filled - Pouches / Sachets / Blister-packs.

Suitable for 100 ml – 1,500 ml or larger packs. (Specify pouch sizes while asking for quote)

Models Available :

This equipment is suitable for :
1) Dynamic Load Test (Destructive Mode)

Test Type : Press till failure

In this method, the sample is compressed until the pouch bursts.

2) Dynamic Load Test (Non-Destructive Mode)

Test Type : Press till Load Setpoint. Then release.

In this method, the sample is compressed only upto the Load setpoint Pre-Determined by the user. If the pouch bursts before the set-point is achieved, then this becomes a destructive test. The machine automatically stops on sample failure or when the preset-load is achieved. Whichever is earlier.

3) Static Load Test (Non-Destructive Mode) (Also known as : Pressure Decay Test)

Test Type : Press till Load Setpoint. Hold till Time Setpoint. The release.

In this method, the sample is compressed upto the Load setpoint Pre-Determined by the user. Then, the force is held on the pouch for some time (predetermined by the user). After the times elapses, the machine automatically returns to the original position. If the pouch bursts before the set-point is achieved, then this becomes a destructive test. The machine automatically stops on sample failure or when the preset-load-time is achieved. Whichever is earlier.